How to Flash MTK Android Stock firmware

How to Flash MTK Android Stock firmware

Install SP Flash Tool

flash tool exe

Installing sp flash tool

Installing SP Flash Tool on windows is just like other software. You need to download

and extract SP Flash Tool on your computer. then find “Flash_Tool.exe” from extracted file.

Now launch it by dabble click or Ran as Administor. After that, you will see sp flash tool is opened.

Now you can install/flash Stock Firmware/Stock Rom, Stock, and Custom Recovery, update Firmware

 unbrick brick MTK Android phones and so on.

Flash Phone Using SP Flash Tool

If you install USB VCOM Driver and install sp flash tool on your computer.

Then Flashing Phone is not so hard for you. You can do it just follow the instruction given below.

Flash A Custom Recovery

So How To Install Custom Recovery Using Sp Flash tool. Frist, Now find recovery.img file and download it.

I meant it could be TWRP/CWM you can place it on your Pc desktop or where you can find it easily.

Flash A Custom Recovery 1

After launching SP Flash Tools fast click Download then click Scatter Loading.

Flash A Custom Recovery 2

Now find and select the scatter file of your device it would look like this (MT6572_Android_Scatter.txt)

just click on “Open”.

Flash A Custom Recovery 3

You should see below image from your Sp flash tools. Make sure all boxes are NOT checked

, if there’s a check, remove it by clicking the check.And now, click “RECOVERY” from the list

. in the mine time, a  new window will pop up, locked the recovery image for your phone

that you want to flash or install. Now click Open.

Now, SWITCH OFF your android phone. When it is off, click the “DOWNLOAD”

button on the SP Flash Tool, then click Yes. After that, connect your Switched-OFF phone

to your computer using USB Cable and allow the flashing procedure to do its thing.

Flash A Custom Recovery 4

After successfully flashing your custom recovery img, you will see a green “OK”.

That’s all, your phone is now running custom recovery img. Now unplug your device,

press and hold Volume up + Power button to boot into recovery mode.

See it’s not too hard.

Download In Easy-Firmware

Download In SP Flash Tools


Leave a Reply